Sale

Titan

330-211

Titan High Efficiency TR1 HEA Reversible Tips


Reversible tips, are the most versatile tips on the market. They are available in many sizes and can be used for a wide variety of coatings. With a reversible tip, you can easily clear tip clogs by simply turning the tip 180 degrees to the clean position and then triggering the sprayer. Reversible tips can be quickly replaced without removing the tip guard and housing.

Size
  • Optimized to spray all architectural paints and coatings at 1,000 psi at production speed.
  • Up to 55% less overspray.
  • Genuine OEM.
  • Less pressure equals less stress extending pump life
    and extending time between repacks.
  • Patented design.
  • Feathered edge provides consistent coverage.
  • More forgiving pattern that decreases runs and drips.
  • Less kickback when triggered providing more control and less
    overspray.
  • Fits all industry standard guards.

Airless Spray Tips
A key component to the successful operation of an airless spray system. They define the spray pattern, control the flow, atomize the coating and ultimately tell the pump how hard it must work. A proper understanding of airless tips is critical to the
success of any airless application.

Tip Characteristics
It is important to remember that the orifice size, in conjunction with
the fan-width, determines the spray characteristics of the tip.

Tip Wear
When beginning a project, choosing the right tip size and fan width
will determine both coating consumption and production time. If
the tip size is wrong — either by choice or through wear — mil
thicknesses will be too heavy and the finish will be unprofessional.
The spray pattern chart demonstrates what happens as a tip wears.
As wear occurs, the pattern size decreases and the orifice size
increases. You will have to make more passes to cover the same
area. There is no standard rate of tip wear due to the variation of
the abrasiveness of all coatings.

While Drake's supplies the highest grade spray tips - all tips will wear with normal use. Using a worn tip can cost you hundreds of dollars in wasted paint and labor; because when a tip wears the size of the orifice increase and the fan width decreases.



Drakes paint spray tip wear guide

Orifice size - inches (thousandths)
Fan Size 0.011 0.013 0.015 0.017 0.019
4-6 330-211 330-213
6-8 330-311 330-313
8-10 330-411 330-413 330-415
10-12 330-515 330-517 330-519
12-14
330-615

330-617

330-619
Flow Rate (gpm) 0.34 0.45 0.68 0.91 1.17